This 6 channel AC triggered remote control is easy to install and use. It is capable of controlling lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC110~240V or DC0~28V. As for 6 channels, it can control six devices simultaneously at most. With 500m working distance, you can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance. The wireless RF signal can pass through walls, floors, doors or other obstacles. Universal input: support voltage of AC110V (100V~120V), widely used in US, Canada… and voltage of AC220V (200V~240V), used in UK, France…
We will try to show you how to control positive and reversal rotation of two AC motors with 6 channel AC remote module. We will use four of all relays. Let’s see the following material.
1×6CH rf receiver
Power supply 220V
Here is the wiring diagram. This is the AC motor’s wiring. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C.
We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.
Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.
Press and hold button 3, motor 1 rotates in reversal direction. Release the button, motor stops.
Press and hold button 2, motor 2 rotates in positive direction. Release the button, motor stops.
Press and hold button 4, motor 2 rotates in positive direction. Release the button, motor stops.
You can leave a response, or trackback from your own site.
Leave a Reply
You must be logged in to post a comment.